LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2019 >> Highlander Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 30 (Automatic Transmission (U660E) - Service Information (1 Of 2)) >> Pattern Select Switch >> Installation [12/2013 - 11/2016] >> Procedure

Installation [12/2013 - 11/2016]: Procedure

WARNING: This page is about a different car, the 2016 Toyota Highlander, 2015 Toyota Highlander, and 2014 Toyota Highlander. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSTALL PATTERN SELECT SWITCH ASSEMBLY 
    1. Engage the 2 claws and install the pattern select switch assembly to the No. 1 switch hole base.
  2. INSTALL NO. 2 SWITCH HOLE BASE 

    Refer to PROCEDURE - Step 20

  3. INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 4

  4. INSTALL NO. 2 CONSOLE UPPER PANEL GARNISH 

    Refer to PROCEDURE - Step 5

  5. INSTALL NO. 1 CONSOLE UPPER PANEL GARNISH 

    Refer to PROCEDURE - Step 6

  6. INSTALL FRONT PANEL GARNISH RH 

    Refer to PROCEDURE - Step 7

  7. INSTALL FRONT PANEL GARNISH LH 

    Refer to PROCEDURE - Step 8

  8. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 9

scientia non olet · About LEMON Manuals