DTC P0575: Cruise Control Input Circuit [12/2013 - 11/2016]: Description
WARNING: This page is about a different car, the 2016 Toyota Highlander, 2015 Toyota Highlander, and 2014 Toyota Highlander. However, it is still accessible from the selected car via links, so may be relevant.
This DTC indicates a malfunction in the ECM.
HINT:
The ECM receives signals from each sensor to control all the functions of the dynamic radar cruise control system with its supervisory CPU and control ECU. When a malfunction is detected, the fail-safe remains on until the engine switch is turned off.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area |
|---|---|---|---|
| P0575 | Cruise Control Input Circuit | ECM has a supervisory CPU and control ECU inside. When each input STP signal is different for approximately 0.15 seconds or more, this DTC is stored. This DTC is also stored after 0.4 seconds have passed from the time a cruise cancel input signal (STP input) is input to the ECM. | ECM |