LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2019 >> Highlander Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 23 (Automatic Transmission (U660F) - Service Information (1 Of 2)) >> Speed Sensor >> Installation [12/2013 - 11/2016] >> Procedure

Installation [12/2013 - 11/2016]: Procedure

WARNING: This page is about a different car, the 2016 Toyota Highlander, 2015 Toyota Highlander, and 2014 Toyota Highlander. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSTALL TRANSMISSION REVOLUTION SENSOR 
    1. Coat the 2 bolts with ATF.
      GTY450695Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Install the transmission revolution sensor to the transmission valve body assembly with the 2 bolts.

      Torque: 10.8 N*m (110 kgf*cm, 8 ft.*lbf) 

    3. Connect the transmission revolution sensor connector.
  2. INSTALL TRANSMISSION VALVE BODY ASSEMBLY 

    Refer to INSTALLATION [12/2013 - 11/2016] 

scientia non olet · About LEMON Manuals