LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2019 >> Highlander Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 23 (Automatic Transmission (U660F) - Service Information (1 Of 2)) >> ATF Temperature Sensor >> Removal [12/2013 - 11/2016] >> Procedure

Removal [12/2013 - 11/2016]: Procedure

WARNING: This page is about a different car, the 2016 Toyota Highlander, 2015 Toyota Highlander, and 2014 Toyota Highlander. However, it is still accessible from the selected car via links, so may be relevant.
  1. REMOVE VALVE BODY OIL STRAINER ASSEMBLY 

    Refer to REMOVAL [12/2013 - 11/2016] 

  2. REMOVE ATF TEMPERATURE SENSOR ASSEMBLY 
    1. Disconnect the ATF temperature sensor assembly connector.
      GTY429212Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *a Clamp
    2. Remove the 4 bolts, ATF temperature sensor assembly and clamp from the transmission valve body assembly.
    3. Remove the O-ring from the ATF temperature sensor assembly.
      GTY439983Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *1 O-ring
scientia non olet · About LEMON Manuals