Installation [12/2013 - 11/2016]: Procedure

WARNING: This page is about a different car, the 2016 Toyota Highlander, 2015 Toyota Highlander, and 2014 Toyota Highlander. However, it is still accessible from the selected car via links, so may be relevant.

INSTALL ATF TEMPERATURE SENSOR ASSEMBLY

Coat a new O-ring with ATF and install it to the ATF temperature sensor assembly.
Coat the 4 bolts with ATF.

Install the ATF temperature sensor assembly and clamp to the transmission valve body assembly with the 4 bolts.

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Clamp

Torque: 10.8 N*m (110 kgf*cm, 8 ft.*lbf)

Bolt Length

Bolt (A)

25 mm (0.984 in.)

Bolt (B)

85 mm (3.35 in.)

Connect the ATF temperature sensor assembly connector.

INSTALL VALVE BODY OIL STRAINER ASSEMBLY
Refer to INSTALLATION [12/2013 - 11/2016]