LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2019 >> Highlander Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 19 (Automatic Transmission (U660F) - Diagnostic Codes & Circuit Tests) >> Automatic Transaxle System >> DTC U0100: Lost Communication with ECM / PCM "A" [12/2013 - 11/2016] >> Description

DTC U0100: Lost Communication with ECM / PCM "A" [12/2013 - 11/2016]: Description

WARNING: This page is about a different car, the 2016 Toyota Highlander, 2015 Toyota Highlander, and 2014 Toyota Highlander. However, it is still accessible from the selected car via links, so may be relevant.

The engine control unit communicates with the TCM using the Controller Area Network (CAN).

If there is a problem in this communication, the TCM stores this DTC.

DTC No. Detection Item DTC Detection Condition Trouble Area MIL Memory
U0100 Lost Communication with ECM / PCM "A" Following conditions are met for 1.25 seconds (1 trip detection logic):
  • Ignition switch ON
  • Battery voltage is 10.5 V or more
  • No communication between the engine control ECU (ECM) and TCM
  • Harness and connector
  • ECM
  • TCM
Comes on DTC stored