Typical Malfunction Thresholds
WARNING: This page is about a different car, the 2016 Toyota Highlander, 2015 Toyota Highlander, and 2014 Toyota Highlander. However, it is still accessible from the selected car via links, so may be relevant.
Either of the following conditions is met: OFF malfunction (A) or (B) or ((C) and (D)), or ON malfunctions
- 2 detections are necessary per driving cycle:
- 1st detection; temporary flag ON
- 2nd detection; pending fault code ON
OFF MALFUNCTION (A):
| Turbine speed - Output speed x 2nd gear ratio | 1, 000 rpm or more |
OFF MALFUNCTION (B):
| Turbine speed - Output speed x 6th gear ratio | 1, 000 rpm or more |
OFF MALFUNCTION (C):
| Input (turbine) speed/Intermediate shaft speed | 3.304 to 7.724 |
OFF MALFUNCTION (D):
| Input (turbine) speed/Intermediate shaft speed | 3.304 to 7.724 |
ON MALFUNCTION:
| Input (turbine) speed/Intermediate shaft speed | 1.901 to 2.340 |