Typical Enabling Conditions
WARNING: This page is about a different car, the 2016 Toyota Highlander, 2015 Toyota Highlander, and 2014 Toyota Highlander. However, it is still accessible from the selected car via links, so may be relevant.
GO and STOP are defined as follows;
THE STOP LIGHT SWITCH REMAINS ON DURING GO AND STOP 5 TIMES.
| The monitor will run whenever this DTC is not present. | None |
| GO: (Vehicle speed is 18.65 mph (30 km/h) or more) | 18.65 mph (30 km/h) or more |
| STOP: (Vehicle speed is less than 1.86 mph (3 km/h)) | Less than 1.86 mph (3 km/h) |
| Starter | OFF |
| Battery voltage | 8 V or more |
| Ignition switch | ON |