LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2019 >> Highlander Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 19 (Automatic Transmission (U660F) - Diagnostic Codes & Circuit Tests) >> Automatic Transaxle System >> DTC P0711: Transmission Fluid Temperature Sensor "A" Performance [12/2013 - 11/2016] >> Description

DTC P0711: Transmission Fluid Temperature Sensor "A" Performance [12/2013 - 11/2016]: Description

WARNING: This page is about a different car, the 2016 Toyota Highlander, 2015 Toyota Highlander, and 2014 Toyota Highlander. However, it is still accessible from the selected car via links, so may be relevant.

The Automatic Transmission Fluid (ATF) temperature sensor converts the fluid temperature into a resistance value for use by the TCM.

The TCM applies a voltage to the temperature sensor through terminal THO1 of the TCM.

The sensor resistance changes with the ATF temperature. As the temperature becomes higher, the sensor resistance decreases.

One terminal of the sensor is grounded so that the sensor resistance decreases and the voltage goes down as the temperature becomes higher.

The TCM calculates the fluid temperature based on the voltage signal.

DTC No. Detection Item DTC Detection Condition Trouble Area MIL Memory
P0711 Transmission Fluid Temperature Sensor "A" Performance Either condition is met: (2-trip detection logic)
  • (a) Certain monitor enabling conditions are met and the ATF temperature is below 20°C (68°F)
  • (b) Certain monitor enabling conditions are met and the ATF temperature is 110°C (230°F) or higher
ATF temperature sensor Comes on DTC stored