LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2019 >> Highlander Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 12 (Starting System (2GR-FE) (Service Information) (Except Hybrid)) >> Ignition Switch >> Installation [12/2013 - 11/2016] >> Procedure

Installation [12/2013 - 11/2016]: Procedure

WARNING: This page is about a different car, the 2016 Toyota Highlander, 2015 Toyota Highlander, and 2014 Toyota Highlander. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSTALL IGNITION OR STARTER SWITCH ASSEMBLY 
    1. Install the ignition or starter switch assembly to the upper steering column bracket assembly with the 2 screws.
  2. INSTALL UPPER STEERING COLUMN BRACKET WITH SWITCH ASSEMBLY 

    Refer to PROCEDURE - Step 12

  3. INSTALL STEERING COLUMN ASSEMBLY 

    Refer to INSTALLATION [12/2013 - ]

scientia non olet · About LEMON Manuals