Caution / Notice / Hint
NOTE:
When replacing the skid control ECU (brake actuator assembly), perform zero point calibration and store system information.
Refer to CALIBRATION [12/2013 - 11/2016]
HINT:
When C1425 and/or C1426 is output together with C1429, inspect and repair the trouble areas indicated by C1425 and/or C1426 first.
for C1425: Refer to DTC C1425: Open in Stop Light Switch Circuit [12/2013 - 11/2016] .
for C1426: Refer to DTC C1426: Stop Light Switch OFF Stuck Malfunction [12/2013 - 11/2016] .