LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2019 >> Highlander Limited, FWD >> Repair and Diagnosis >> Brakes >> Anti-Lock Brakes >> Vehicle Stability Control System - Diagnostic Codes - (Except Hybrid) (2 Of 2) >> Vehicle Stability Control System >> DTC C1422: Master Cylinder Pressure Sensor Zero Point High Malfunction [11/2016 - ] >> Caution / Notice / Hint

Caution / Notice / Hint

NOTE:
  • When replacing the skid control ECU (brake actuator assembly), perform zero point calibration and store system information.

    Refer to CALIBRATION [11/2016 - ]

  • Inspect the fuses for circuits related to this system before performing the following procedure.

HINT: 

When C1425 is output together with C1422, inspect and repair the trouble areas indicated by C1425 first.

Refer to DTC C1425: Open in Stop Light Switch Circuit [11/2016 - ] 

scientia non olet · About LEMON Manuals