LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2019 >> Highlander Limited, FWD >> Repair and Diagnosis >> Body & Frame >> Exterior/Interior Trim >> Exterior Panels / Trim (Service Information) (Except Hybrid) >> Name Plate >> Removal [12/2013 - ] >> Procedure

Removal [12/2013 - ]: Procedure

  1. REMOVE SYMBOL EMBLEM 

    See step  10

  2. REMOVE NO. 2 LUGGAGE COMPARTMENT DOOR NAME PLATE 
    1. Apply protective tape around the No. 2 luggage compartment door name plate.
      GTY443834Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Protective Tape
    2. Using a moulding remover, separate the double-sided tape to remove the No. 2 luggage compartment door name plate.
      NOTE:

      Be careful not to damage the vehicle body.

  3. REMOVE NO. 5 BACK DOOR NAME PLATE 
    1. Apply protective tape around the No. 5 back door name plate.
      GTY426135Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Protective Tape
    2. Using a moulding remover, separate the double-sided tape to remove the No. 5 back door name plate.
      NOTE:

      Be careful not to damage the vehicle body.

  4. REMOVE NO. 4 LUGGAGE COMPARTMENT DOOR PLATE 
    1. Apply protective tape around the No. 4 luggage compartment door plate.
      GTY440952Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Protective Tape
    2. Using a moulding remover, separate the double-sided tape to remove the No. 4 luggage compartment door plate.
      NOTE:

      Be careful not to damage the vehicle body.

scientia non olet · About LEMON Manuals