Green And Red Indicators Blink Simultaneously [12/2013 - ]: Procedure

CHANGE SUBSCRIPTION MODE
1. Turn the engine switch on (IG).
2. Push the manual (SOS) switch.
3. The vehicle will issue a voice prompt: "Safety Connect is not initialized. To activate, please press the button again within 5 seconds."
4. Push the manual (SOS) switch and a beep will be emitted.
5. The telematics service provider will send an End Call command and the manual (SOS) switch green indicator will illuminate.
6. A voice prompt will state: "Activation Complete." (This may take up to 3 minutes.)
7. Turn the engine switch off.
NEXT
CHECK SUBSCRIPTION MODE
1. Turn the engine switch on (IG).
2. Confirm that the manual (SOS) switch red indicator illuminates for 2 seconds and turns off and the manual (SOS) switch green indicator illuminates and remains on.
  Refer to SYSTEM DESCRIPTION [12/2013 - ]
NEXT

END