LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2019 >> Highlander Limited, FWD >> Repair and Diagnosis >> Accessories & Equipment >> Collision/Avoidance >> Blind Spot Monitor System - Diagnostic Codes & Circuit Tests - (Except Hybrid) >> Blind Spot Monitor System >> DTC C1AB7: Blind Spot Monitor Slave Module [12/2013 - 11/2016] >> Caution / Notice / Hint

Caution / Notice / Hint

NOTE:

When checking for DTCs, make sure that the blind spot monitor main switch (warning canceling switch assembly) is on.

scientia non olet · About LEMON Manuals