DTC P107B: Fuel Rail Pressure Sensor "B" Circuit Range/Performance [11/2016 - 10/2017]: Description
WARNING: This page is about a different variant/trim than selected.
Refer to DTC P107C (Refer to DESCRIPTION
).
| DTC No. |
Detection Item |
DTC Detection Condition |
Trouble Area |
MIL |
Memory |
| P107B |
Fuel Rail Pressure Sensor "B" Circuit Range/Performance |
Either of following conditions is met (2 trip detection logic):
- When the target fuel pressure for the low pressure side changes, the change in the fuel pressure sensor (for low pressure side) value is abnormal.
- When the fuel pump (for low pressure side) is operated at maximum speed when the engine is started for the first time since the power switch was turned on (READY), the fuel pressure on the low pressure side is detected to be higher or lower than the threshold value.
|
- Leak of fuel
- Fuel pump control ECU
- Fuel Delivery Pipe with Sensor Assembly (fuel pressure sensor (for low pressure side))
- Fuel pump (for low pressure side)
- Fuel main valve assembly (for high pressure side)
- ECM
|
Comes on |
DTC stored |