DTC P0116: Engine Coolant Temperature Circuit Range / Performance [11/2016 - ]: Procedure

1. Connect the Techstream to the DLC3.
2. Turn the power switch on (IG).
3. Turn the Techstream on.
4. Enter the following menus: Powertrain / Engine and ECT / Trouble Codes.
5. Read the DTCs.

   Powertrain > Engine and ECT > Trouble Codes 

   Result

   Result	Proceed to
   DTC P0116 is output	A
   DTC P0116 and other DTCs are output	B

   HINT: 

   If any DTCs other than P0116 are output, troubleshoot those DTCs first.

Result: 

B 

GO TO DTC CHART. Refer to  DIAGNOSTIC TROUBLE CODE CHART [11/2016 - 10/2017]  or  DIAGNOSTIC TROUBLE CODE CHART [10/2017 - ] 

Result: 

A 

See step  2

1. Inspect the water inlet with thermostat sub-assembly (thermostat opening temperature).

   Refer to INSPECTION [11/2016 - ]

   HINT: 

   Perform "Inspection After Repair" after replacing the engine coolant temperature sensor.

   Refer to INITIALIZATION [11/2016 - ]

   Result

   Proceed to
   OK
   NG

Result: 

OK 

REPLACE ENGINE COOLANT TEMPERATURE SENSOR. Refer to  REMOVAL [11/2016 - ] 

Result: 

NG 

REPLACE WATER INLET WITH THERMOSTAT SUB-ASSEMBLY. Refer to  REMOVAL [11/2016 - ]