LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2019 >> Highlander LE Plus, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 35 (SFI System [2GR-FE] - Diagnostic Codes - (Except Hybrid) (5 Of 5)) >> SFI System >> DTC P060D: Internal Control Module Accelerator Pedal Position Performance [12/2013 - 11/2016] >> Monitor Description

Monitor Description

WARNING: This page is about a different car, the 2016 Toyota Highlander, 2015 Toyota Highlander, and 2014 Toyota Highlander. However, it is still accessible from the selected car via links, so may be relevant.

The ECM monitors the input signals of the No. 1 accelerator pedal position sensor. When the input signal and control signal deviate, this DTC is stored.

DTC No. Detection Item DTC Detection Condition Trouble Area MIL Memory Note
P060D Internal Control Module Accelerator Pedal Position Performance Either of the following conditions is met (1 trip detection logic):
  • There is an ECM main CPU error.
  • There is an ECM sub CPU error.
 ECM Comes on DTC stored DTC for Mexico Models
- Applies
scientia non olet · About LEMON Manuals