DTC B150A: Lost Communication with HMI-LAN [11/2016 - ]: Description
The combination meter assembly receives a text data signal from the navigation receiver assembly*1 or radio and display receiver assembly*2 via local bus communication.
Based on this signal, navigation system information is displayed on the multi-information display.
This DTC is stored when the combination meter assembly cannot receive the signal.
- *1: for Navigation Receiver Type
- *2: for Radio and Display Type
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area | Memory | Note |
|---|---|---|---|---|---|
| B150A | Lost Communication with HMI-LAN | After the combination meter assembly receives a registration information signal, which is sent by the navigation receiver assembly when the ignition switch is ACC, 1 or more times, the combination meter assembly cannot receive the signal for 30 seconds or more. |
|
DTC stored | - |
- *1: for Navigation Receiver Type
- *2: for Radio and Display Type