LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2019 >> Highlander LE Plus, FWD >> Repair and Diagnosis >> Accessories & Equipment >> Headlights >> Automatic High Beam System (Exterior) - Diagnostics - Introduction - (Except Hybrid) >> Automatic High Beam System >> DTC Check / Clear [12/2013 - ] >> DTC Check / Clear [12/2013 - ]

DTC Check / Clear [12/2013 - ]

  1. CHECK DTC 
    1. Connect the Techstream to the DLC3.
    2. Turn the ignition switch to ON.
    3. Turn the Techstream on.
    4. Enter the following menus: Body Electrical / Main Body / Trouble Codes.

      Body Electrical > Main Body > Trouble Codes 

    5. Check for DTCs.
  2. CLEAR DTC 
    1. Connect the Techstream to the DLC3.
    2. Turn the ignition switch to ON.
    3. Turn the Techstream on.
    4. Enter the following menus: Body Electrical / Main Body / Trouble Codes.

      Body Electrical > Main Body > Clear DTCs 

    5. Clear the DTCs.
scientia non olet · About LEMON Manuals