Customize Parameters [12/2013 - ]

CUSTOMIZE METER / GAUGE SYSTEM

Customizing with the Techstream

Connect the Techstream to the DLC3.
Turn the ignition switch to ON.
Turn the Techstream on.
Enter the following menus: Customize Setting / Warning or Display.

Select the setting by referring to the table below.

NOTE:

Record the current settings before customizing.

Warning

Tester Display	Description	Default	Setting	ECU
Flasher Sound Volume Adjustment	Function to change the flasher sound volume	Medium	10:Large, 00:Medium, 01:Small	Combination meter assembly
Lane Change Flashing Times Setting	Function to change the lane change flashing times	3	000:OFF, 001:3, 010:4, 011:5, 100:6, 101:7	Combination meter assembly

Display

Tester Display	Description	Default	Setting	ECU
ECO Drive Indicator Zone	Function to change the eco drive indicator zone	ON	0:OFF, 1:ON	Combination meter assembly
ODO Display Time After IG OFF Setting	Function to change the ODO display time after the ignition switch is turned off	30s	00:30s, 01:60s, 10:600s, 11:OFF	Combination meter assembly