Inspection [06/2016 - ]: Procedure

INSPECT TRIP SWITCH

GTY390728

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Measure the resistance according to the value(s) in the table below.

Standard Resistance

Tester Connection	Condition	Specified Condition
2 (TRIP) - 1	Trip switch off	10 kΩ or higher
2 (TRIP) - 1	Trip switch on	Below 1 Ω
3 (DISP) - 1	Display switch off	10 kΩ or higher
3 (DISP) - 1	Display switch on	Below 1 Ω
8 (CS) - 1	Unit switch off	10 kΩ or higher
8 (CS) - 1	Unit switch on	Below 1 Ω

TEXT IN ILLUSTRATION

*a	Component without harness connected (Trip Switch)