LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2019 >> 86 Base, Automatic Trans >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Meter / Gauge / Display (Service Information) >> Light Control Rheostat >> Installation [06/2016 - ] >> Procedure

Installation [06/2016 - ]: Procedure

  1. INSTALL LIGHT CONTROL RHEOSTAT 
    1. Engage the 2 claws to install the light control rheostat.
  2. INSTALL SWITCH BASE 
    1. Engage the 4 claws to install the switch base.
  3. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY 
    1. Connect each connector.
    2. Engage the 4 claws.
    3. Engage the 4 clips to install the No. 1 instrument panel under cover sub-assembly.
    4. Install the 2 screws.
  4. INSTALL INSTRUMENT SIDE PANEL LH 

    Refer to PROCEDURE - Step 8 [06/2016 - 03/2017] , or refer to PROCEDURE - Step 8 [03/2017 - ]

scientia non olet · About LEMON Manuals