LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2018 >> RAV4 XLE, FWD >> Repair and Diagnosis >> Restraints >> Seat Belts >> Seat Belt (Service Information) (Except Hybrid) >> Rear Center Seat Outer Belt Assembly >> Installation [12/2012 - ] >> Procedure

Installation [12/2012 - ]: Procedure

  1. INSTALL REAR SEAT 3 POINT TYPE BELT ASSEMBLY LH 
    1. Attach the claw.
    2. Install the rear seat 3 point type belt assembly LH with the 2 bolts.

      Torque: 42 N*m (428 kgf*cm, 31 ft.*lbf) 

  2. INSTALL ROOF HEADLINING ASSEMBLY 

    Refer to INSTALLATION [12/2012 - 10/2015] , or refer to INSTALLATION [10/2015 - 08/2017] , or refer to INSTALLATION [08/2017 - ]

  3. INSTALL SHOULDER BELT ANCHOR COVER RH 
    1. Attach the 4 claws to install the shoulder belt anchor cover RH.
scientia non olet · About LEMON Manuals