On-Vehicle Inspection [12/2012 - ]: Procedure
- INSPECT FRONT SEAT OUTER BELT ASSEMBLY (for Vehicle not Involved in Collision)
- Perform a diagnostic system check.
Refer to DTC CHECK / CLEAR [12/2012 - ]
- Visually check for defects with the front seat outer belt assembly installed on the vehicle.
- The defects are as follows:
- Cuts on the front seat outer belt assembly
- Small cracks on the front seat outer belt assembly
- Significant discoloration on the front seat outer belt assembly
OK
No defects are found.
HINT:
If any of the defects is found, replace the front seat outer belt assembly with a new one.
- The defects are as follows:
- Perform a diagnostic system check.
- INSPECT FRONT SEAT OUTER BELT ASSEMBLY (for Vehicle Involved in Collision)
- Perform a diagnostic system check.
Refer to DTC CHECK / CLEAR [12/2012 - ]
- Visually check for defects with the front seat outer belt assembly removed from the vehicle.
- The defects are as follows:
- Cuts on the front seat outer belt assembly
- Small cracks on the front seat outer belt assembly
- Significant discoloration on the front seat outer belt assembly
- Cracks or other damage to the connector
OK
No defects are found.
HINT:
If any of the defects is found, replace the front seat outer belt assembly with a new one.
- The defects are as follows:
- Perform a diagnostic system check.