LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2018 >> RAV4 XLE, FWD >> Repair and Diagnosis >> Restraints >> Seat Belts >> Seat Belt (Service Information) (Except Hybrid) >> Front Seat Inner Belt Assembly >> Installation [08/2016 - ] >> Procedure

Installation [08/2016 - ]: Procedure

  1. INSTALL FRONT SEAT INNER BELT ASSEMBLY LH 
    1. Install the front seat inner belt assembly LH with the nut.

      Torque: 42 N*m (428 kgf*cm, 31 ft.*lbf) 

      NOTE:

      Do not allow the anchor of the front seat inner belt assembly LH to overlap the protruding part of the separate type front seat cushion spring assembly.

      GTY374115Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *1 Protruding Part
    2. Return the separate type front seat cushion cover to its original position.
      GTY383339Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    3. Connect each connector and each clamp.
  2. INSTALL FRONT SEAT INNER BELT ASSEMBLY RH 
    1. Install the front seat inner belt assembly RH with the nut.

      Torque: 42 N*m (428 kgf*cm, 31 ft.*lbf) 

      NOTE:

      Do not allow the anchor of the front seat inner belt assembly RH to overlap the protruding part of the separate type front seat cushion spring assembly.

      GTY561600Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *1 Protruding Part
    2. Return the separate type front seat cushion cover to its original position.
      GTY377553Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    3. Connect each connector and each clamp.
    4. Attach the 2 guides and 2 claws to install the front set inner cushion shield RH.
  3. INSTALL FRONT SEAT ASSEMBLY 
    1. for Manual Seat:

      Refer to INSTALLATION [08/2016 - ]

    2. for Power Seat:

      Refer to INSTALLATION [12/2012 - ]

scientia non olet · About LEMON Manuals