LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2018 >> RAV4 XLE, FWD >> Repair and Diagnosis >> Restraints >> Seat Belts >> Seat Belt (Service Information) (Except Hybrid) >> Front Seat Inner Belt Assembly >> Inspection [08/2016 - ] >> Procedure

Inspection [08/2016 - ]: Procedure

  1. INSPECT FRONT SEAT INNER BELT ASSEMBLY LH 
    1. Measure the resistance according to the value(s) in the table below.
      GTY361411Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *1 Connector A
      *2 Connector B
      *a Component without harness connected
      (Front Seat Inner Belt Assembly LH)

      Standard Resistance

      Tester Connection Condition Specified Condition
      A-3 (LSP-) - B-1 Always Below 1 Ω
      A-4 (LSP+) - B-2 Always Below 1 Ω

      If the result is not as specified, replace the front seat inner belt assembly LH.

scientia non olet · About LEMON Manuals