LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2018 >> RAV4 XLE, AWD >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> (Door / Hatch) (Service Information) (Except Hybrid) >> Back Door Closer Ecu >> Removal [12/2012 - 10/2015] >> Procedure

Removal [12/2012 - 10/2015]: Procedure

  1. REMOVE BACK DOOR CENTER GARNISH 

    See step  1

  2. REMOVE BACK DOOR SIDE GARNISH LH 

    See step  2

  3. REMOVE BACK DOOR SIDE GARNISH RH 

    HINT: 

    Use the same procedure described for the LH side.

  4. REMOVE BACK DOOR TRIM BOARD ASSEMBLY 

    See step  4

  5. REMOVE MULTIPLEX NETWORK DOOR ECU 
    1. Disconnect the 2 connectors.
      GTY382876Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the 2 bolts.
    3. Detach the clamp and guide and remove the multiplex network door ECU.
scientia non olet · About LEMON Manuals