LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2018 >> RAV4 LE, AWD >> Repair and Diagnosis >> Accessories & Equipment >> Seats >> Seats (Service Information) (Except Hybrid) (2 Of 2) >> Power Seat Switch >> Installation [10/2015 - ] >> Procedure

Installation [10/2015 - ]: Procedure

  1. INSTALL FRONT POWER SEAT SWITCH 
    1. Install the front power seat switch with the 3 screws.
  2. INSTALL RECLINING POWER SEAT SWITCH KNOB 

    Refer to PROCEDURE - Step 24 [10/2015 - 08/2016] , or refer to PROCEDURE - Step 24 [08/2016 - ]

  3. INSTALL SLIDE AND VERTICAL POWER SEAT SWITCH KNOB 

    Refer to PROCEDURE - Step 25 [10/2015 - 08/2016] , or refer to PROCEDURE - Step 25 [08/2016 - ]

  4. INSTALL FRONT SEAT CUSHION SHIELD LH 

    Refer to PROCEDURE - Step 26 [10/2015 - 08/2016] , or refer to PROCEDURE - Step 26 [08/2016 - ]

  5. INSTALL FRONT INNER NO. 1 SEAT CUSHION SHIELD LH 

    Refer to PROCEDURE - Step 27 [10/2015 - 08/2016] , or refer to PROCEDURE - Step 27 [08/2016 - ]

  6. INSTALL FRONT SEAT ASSEMBLY LH 

    Refer to INSTALLATION [12/2012 - ]

  7. INSPECT FRONT POWER SEAT CONTROL SYSTEM 

    Refer to OPERATION CHECK [10/2015 - ]

scientia non olet · About LEMON Manuals