LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2018 >> RAV4 LE, AWD >> Repair and Diagnosis >> Accessories & Equipment >> Seats >> Seats (Service Information) (Except Hybrid) (2 Of 2) >> FRONT SEATBACK HEATER (for Driver Side) >> Inspection [12/2012 - 08/2016] >> Procedure

Inspection [12/2012 - 08/2016]: Procedure

  1. INSPECT FRONT SEATBACK HEATER ASSEMBLY LH 
    GTY361791Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    *a Component without harness connected
    (Front Seatback Heater Assembly LH)
    1. Check the front seatback heater assembly LH.
      1. Measure the resistance according to the value(s) in the table below.

        Standard Resistance

        Tester Connection Condition Specified Condition
        1 - 2 Seatback heater temperature 20°C (68°F) 1.68 to 1.72 Ω
        1 - 3 Seatback heater temperature 20°C (68°F) 4.22 to 4.30 Ω

        If the result is not as specified, replace the front seatback heater assembly LH.

  2. INSPECT FRONT SEATBACK HEATER ASSEMBLY RH 
    GTY361791Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    *a Component without harness connected
    (Front Seatback Heater Assembly RH)
    1. Check the front seatback heater assembly RH.
      1. Measure the resistance according to the value(s) in the table below.

        Standard Resistance

        Tester Connection Condition Specified Condition
        1 - 2 Seatback heater temperature 20°C (68°F) 1.68 to 1.72 Ω
        1 - 3 Seatback heater temperature 20°C (68°F) 4.22 to 4.30 Ω

        If the result is not as specified, replace the front seatback heater assembly RH.

scientia non olet · About LEMON Manuals