Removal [12/2012 - ]: Procedure
- REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY
Refer to PROCEDURE - Step 7 [12/2012 - 08/2016] , or refer to PROCEDURE - Step 7 [08/2016 - ]
- REMOVE STOP LIGHT SWITCH ASSEMBLY
- Disconnect the connector.
- Turn the stop light switch assembly counterclockwise to remove the stop light switch assembly.
- REMOVE STOP LIGHT SWITCH MOUNTING ADJUSTER
- Detach the 2 claws to remove the stop light switch mounting adjuster.