Installation [11/2015 - ]: Procedure

INSTALL HYBRID VEHICLE CONTROL ECU

Engage the 2 claws to install the hybrid vehicle control ECU as shown in the illustration.

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

NOTE:

Make sure that the hybrid vehicle control ECU is securely installed.

INSTALL ECU INTEGRATION BOX RH

Connect the 3 hybrid vehicle control ECU connectors and move each lock lever as shown in the illustration to lock the connectors.

*a	Lock Lever

INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY
Refer to PROCEDURE - Step 10 [11/2015 - 11/2017] , or refer to PROCEDURE - Step 10 [11/2017 - 08/2019] , or refer to PROCEDURE - Step 10 [08/2019 -]
INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY
Refer to PROCEDURE - Step 11 [11/2015 - 11/2017] , or refer to PROCEDURE - Step 11 [11/2017 - 08/2019] , or refer to PROCEDURE - Step 11 [08/2019 -]
CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL
NOTE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

Refer to INITIALIZATION [11/2015 - 11/2017] , or refer to INITIALIZATION [11/2017 - 12/2018] , or refer to INITIALIZATION [12/2018 - 08/2019] , or refer to INITIALIZATION [08/2019 - 07/2020] , or refer to INITIALIZATION [07/2020 - ]
PERFORM INITIALIZATION
Refer to INITIALIZATION [11/2015 - 11/2017] , or refer to INITIALIZATION [11/2017 - 12/2018] , or refer to INITIALIZATION [12/2018 - 08/2019] , or refer to INITIALIZATION [08/2019 - 07/2020] , or refer to INITIALIZATION [07/2020 - ]