LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2018 >> Prius Two Eco >> Repair and Diagnosis >> Accessories & Equipment >> Wiper/Washer Systems >> Wiper System / Washer System - Service Information >> Wiper Ecu >> Installation [11/2015 - ] >> Procedure

Installation [11/2015 - ]: Procedure

  1. INSTALL WINDSHIELD WIPER RELAY ASSEMBLY 
    1. Connect the connector.
    2. Engage the guide and install the windshield wiper relay assembly with the bolt.

      Torque: 12.5 N.m (127 kgf.cm, 9 ft./lbf) 

  2. INSTALL LOWER INSTRUMENT PANEL SUB-ASSEMBLY 

    Refer to INSTALLATION [11/2015 - 11/2017] , or refer to INSTALLATION [11/2017 - 08/2019] , or refer to INSTALLATION [08/2019 - ]

scientia non olet · About LEMON Manuals