LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2018 >> Prius Prime Plus >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> (Door / Hatch) (Service Information) (2 Of 2) >> Fuel Lid Opener Motor Assembly >> Removal [05/2019 - 07/2020] >> Procedure

Removal [05/2019 - 07/2020]: Procedure

  1. REMOVE TONNEAU COVER ASSEMBLY 

    Refer to PROCEDURE - Step 1

  2. REMOVE REAR NO. 2 FLOOR BOARD 

    Refer to PROCEDURE - Step 2

  3. REMOVE REAR NO. 4 FLOOR BOARD 

    Refer to PROCEDURE - Step 3

  4. REMOVE REAR NO. 3 FLOOR BOARD 

    Refer to PROCEDURE - Step 4

  5. REMOVE REAR NO. 1 FLOOR BOARD 

    Refer to PROCEDURE - Step 5

  6. REMOVE DECK FLOOR BOX LH 

    Refer to PROCEDURE - Step 6

  7. REMOVE DECK FLOOR BOX RH 

    Refer to PROCEDURE - Step 7

  8. REMOVE DECK TRIM SERVICE HOLE COVER 

    Refer to PROCEDURE - Step 2

  9. REMOVE REAR DECK TRIM COVER 

    Refer to PROCEDURE - Step 9

  10. REMOVE REAR SEAT HEADREST ASSEMBLY 

    Refer to PROCEDURE - Step 2

  11. DISCONNECT REAR CENTER SEAT OUTER BELT ASSEMBLY 

    Refer to PROCEDURE - Step 4

  12. REMOVE REAR SEATBACK ASSEMBLY LH 

    Refer to PROCEDURE - Step 6

  13. REMOVE REAR SEAT CUSHION ASSEMBLY 

    Refer to PROCEDURE - Step 7

  14. REMOVE REAR SEAT CUSHION LOCK HOOK 

    Refer to PROCEDURE - Step 8

  15. REMOVE REAR DOOR SCUFF PLATE LH 

    Refer to PROCEDURE - Step 14

  16. DISCONNECT REAR DOOR OPENING TRIM WEATHERSTRIP LH 
    1. Disconnect the rear door opening trim weatherstrip LH.
  17. REMOVE REAR UNDER SIDE COVER LH 

    Refer to PROCEDURE - Step 31

  18. REMOVE REAR SEATBACK HINGE SUB-ASSEMBLY LH 

    Refer to PROCEDURE - Step 32

  19. REMOVE REAR SEAT SIDE GARNISH LH 

    Refer to PROCEDURE - Step 33

  20. REMOVE NO. 1 TONNEAU COVER HOLDER CAP 

    Refer to PROCEDURE - Step 34

  21. REMOVE TONNEAU COVER HOOK A 

    Refer to PROCEDURE - Step 35

  22. REMOVE DECK TRIM SIDE PANEL ASSEMBLY LH 

    Refer to PROCEDURE - Step 36

  23. REMOVE FUEL FILLER OPENING LID LOCK COVER 
    1. Disengage the 2 claws and remove the fuel filler opening lid lock cover as shown in the illustration.
      GTY911987Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Remove in this Direction
  24. REMOVE FUEL FILLER OPENING LID LOCK RETAINER 
    1. Turn and remove the fuel filler opening lid lock retainer as indicated by the arrows, in the order shown in the illustration.
      GTY944657Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Turn in this Direction (1)
      Remove in this Direction (2)
  25. REMOVE FUEL LID LOCK WITH MOTOR ASSEMBLY 
    1. Disconnect the connector.
      GTY608206Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Disengage the 2 claws to remove the fuel lid lock with motor assembly.
scientia non olet · About LEMON Manuals