LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2018 >> Prius Prime Plus >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> (Door / Hatch) (Service Information) (2 Of 2) >> Charge Lid Opener Unit >> Reassembly [09/2016 - ] >> Procedure

Reassembly [09/2016 - ]: Procedure

  1. INSTALL SPOT LIGHT ASSEMBLY 

    Refer to PROCEDURE - Step 1 [09/2016 - 05/2019] , or refer to PROCEDURE - Step 1 [05/2019 - 07/2020] , or refer to PROCEDURE - Step 1 [07/2020 - ]

  2. INSTALL SPOT LIGHT COVER 

    Refer to PROCEDURE - Step 2 [09/2016 - 05/2019] , or refer to PROCEDURE - Step 2 [05/2019 - 07/2020] , or refer to PROCEDURE - Step 2 [07/2020 - ]

  3. INSTALL EV CHARGER LID INDICATOR ASSEMBLY 

    Refer to PROCEDURE - Step 1

  4. INSTALL FUEL FILLER OPENING LID HINGE SPRING 
    1. Engage the guide to install the fuel filler opening lid hinge spring as shown in the illustration.
      GTY712930Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Install in this Direction
  5. INSTALL PUSH START SWITCH BRACKET 
    1. Engage the 2 claws to install the push start switch bracket.
      GTY740597Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals