Installation [04/2018 -]: Procedure

WARNING: This page is about a different car, the 2022 Toyota Avalon, 2021 Toyota Avalon, 2020 Toyota Avalon, and 2019 Toyota Avalon. However, it is still accessible from the selected car via links, so may be relevant.

INSTALL FRONT NO. 2 SPEAKER ASSEMBLY

NOTE:

Do not touch the speaker cone.

HINT:

Use the same procedure for the RH side and LH side.

Connect the connector.

Install the front No. 2 speaker assembly with the 2 screws.

Fig 1: Identifying Front No. 2 Speaker Assembly Screws With Tightening Sequence

for LH Side

for RH Side

HINT:

Install the screws in the order shown in the illustration.

INSTALL FRONT NO. 4 SPEAKER ASSEMBLY (for 14 Speakers)
1. Connect the connector.
2. Install the front No. 4 speaker assembly with the 2 screws.
  
  Fig 2: Identifying Front No. 4 Speaker Assembly Screws With Tightening Sequence (For 14 Speakers)
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  
  HINT:
  
  Install the screws in the order shown in the illustration.
INSTALL NO. 1 DEFROSTER NOZZLE GARNISH
Refer to PROCEDURE - Step 15
INSTALL FRONT PILLAR GARNISH LH
Refer to PROCEDURE - Step 29 [04/2018 - 08/2020] , or refer to PROCEDURE - Step 27 [08/2020 -]
INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP LH
Refer to PROCEDURE - Step 1
INSTALL FRONT PILLAR GARNISH RH
HINT:

Use the same procedure as for the LH side.
INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP RH
HINT:

Use the same procedure as for the LH side.