LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2018 >> Prius One >> Repair and Diagnosis >> External Pages >> Different car >> Section 150 (Hybrid Transmission (Service Information) [P710]) >> Shift Lever Knob >> Installation [04/2018 - ] >> Procedure

Installation [04/2018 - ]: Procedure

WARNING: This page is about a different car, the 2022 Toyota Avalon, 2021 Toyota Avalon, 2020 Toyota Avalon, and 2019 Toyota Avalon. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY 
    1. Install the shift lever knob sub-assembly to the transmission floor shift assembly.
      GTY841335Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Engage the 2 claws to connect the shifting hole cover sub-assembly as shown in the illustration.
      GTY841336Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      NOTE:

      Make sure that the shifting hole cover sub-assembly does not twist after installing the shift lever knob sub-assembly.

scientia non olet · About LEMON Manuals