LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2018 >> Prius One >> Repair and Diagnosis >> External Pages >> Different car >> Section 147 (Hybrid Battery Control System (Service Information) (1 Of 2)) >> FUSE BOX (for NICKEL METAL HYDRIDE BATTERY) >> Removal [04/2018 - 08/2020] >> Procedure

Removal [04/2018 - 08/2020]: Procedure

WARNING: This page is about a different car, the 2022 Toyota Avalon, 2021 Toyota Avalon, 2020 Toyota Avalon, and 2019 Toyota Avalon. However, it is still accessible from the selected car via links, so may be relevant.
  1. REMOVE HV BATTERY 

    Refer to REMOVAL [04/2018 - 08/2020]

  2. REMOVE UPPER HV BATTERY COVER SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 2

  3. REMOVE NO. 1 HV BATTERY SHIELD PANEL 

    Refer to PROCEDURE - Step 3

  4. REMOVE HYBRID BATTERY TERMINAL BLOCK 
    WARNING:

    Be sure to wear insulated gloves and protective goggles.

    1. Remove the bolt to separate the hybrid battery terminal block from the HV battery.
      GTY762979Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Disconnect the 2 hybrid battery terminal block connectors to remove the hybrid battery terminal block.
      GTY762977Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      NOTE:

      Insulate the disconnected high-voltage connectors with insulating tape.

scientia non olet · About LEMON Manuals