Installation [04/2018 - 08/2020]: Procedure
WARNING: This page is about a different car, the 2022 Toyota Avalon, 2021 Toyota Avalon, 2020 Toyota Avalon, and 2019 Toyota Avalon. However, it is still accessible from the selected car via links, so may be relevant.
- INSTALL HYBRID BATTERY TERMINAL BLOCK WARNING:
Be sure to wear insulated gloves and protective goggles.
- Connect the 2 hybrid battery terminal block connectors.NOTE:
Make sure that the connectors are connected securely.
- Install the hybrid battery terminal block to the HV battery with the bolt.
*a Pin Torque: 7.5 N*m (76 kgf*cm, 66 in.*lbf)
NOTE:Make sure to align the hole of the hybrid battery terminal block with the pin.
- Connect the 2 hybrid battery terminal block connectors.
- INSTALL NO. 1 HV BATTERY SHIELD PANEL
Refer to PROCEDURE - Step 2
- INSTALL UPPER HV BATTERY COVER SUB-ASSEMBLY
Refer to PROCEDURE - Step 3
- INSTALL HV BATTERY
Refer to INSTALLATION [04/2018 - 08/2020]