LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2018 >> Prius C One >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Brake System (Hydraulic) (Service Information) >> Brake Booster Pump >> Inspection [11/2015 - ] >> Procedure

Inspection [11/2015 - ]: Procedure

  1. INSPECT BRAKE BOOSTER PUMP ASSEMBLY 
    1. Measure the resistance according to the value(s) in the table below.
      GTY736874Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

      Standard Resistance

      Tester Connection Condition Specified Condition
      A45-1 (BM1) - A45-2 (GND1) Always Below 10 Ω
      A46-2 (BM2) - A46-1 (GND2) Always Below 10 Ω
      A45-1 (BM1) - A46-2 (BM2) Always Below 1 Ω
      A45-2 (GND1) - A46-1 (GND2) Always Below 1 Ω
      TEXT IN ILLUSTRATION

      *a Component without harness connected
      (Brake Booster Pump)
scientia non olet · About LEMON Manuals