LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2018 >> Prius C One >> Repair and Diagnosis >> Accessories & Equipment >> Communication Devices >> Can Communication System (W/O Safety Sense C) - Diagnostic Codes & Symptom Tests >> CAN COMMUNICATION SYSTEM(w/o Toyota Safety Sense C) >> DTC U0100: Lost Communication with ECM / PCM "A"; DTC U0129: Lost Communication with Brake System Control Module; DTC U0293: Lost Communication with HV ECU [06/2017 - ] >> Description

DTC U0100: Lost Communication with ECM / PCM "A"; DTC U0129: Lost Communication with Brake System Control Module; DTC U0293: Lost Communication with HV ECU [06/2017 - ]: Description

DTC No. DTC Detection Condition Trouble Area
U0100 The hybrid vehicle control ECU does not receive data from the ECM.
  • Open or short in sub bus 15 main line or connector
  • Open or short in sub bus 15 branch line or connector
  • Power source circuit of hybrid vehicle control ECU
  • Hybrid vehicle control ECU
  • Power source circuit of ECM
  • ECM
  • Open or short in CAN junction connector LH
U0129 The hybrid vehicle control ECU does not receive data from the brake booster with master cylinder assembly (skid control ECU).
  • Open or short in sub bus 15 main line or connector
  • Open or short in sub bus 15 branch line or connector
  • Power source circuit of hybrid vehicle control ECU
  • Hybrid vehicle control ECU
  • Power source circuit of brake booster with master cylinder assembly (skid control ECU)
  • Brake booster with master cylinder assembly (Skid control ECU)
  • Open or short in CAN junction connector LH
U0293
  • The ECM does not receive data from the hybrid vehicle control ECU.
  • The brake booster with master cylinder assembly (skid control ECU) does not receive data from the hybrid vehicle control ECU.
  • Open or short in sub bus 15 main line or connector
  • Open or short in sub bus 15 branch line or connector
  • Power source circuit of ECM
  • ECM
  • Power source circuit of hybrid vehicle control ECU
  • Hybrid vehicle control ECU
  • Power source circuit of brake booster with master cylinder assembly (skid control ECU)
  • Brake booster with master cylinder assembly (Skid control ECU)
  • Open or short in CAN junction connector LH

HINT: 

This diagnosis procedure is for when DTC U0100, U0129 and U0293 are output at the same time.