| Air Conditioning Amplifier Communication Stop Mode |
Either condition is met:
- "Air Conditioning Amplifier" is not displayed on the "CAN Bus Check" screen of the Techstream (Refer to PROBLEM SYMPTOMS TABLE [11/2015 - ]
)
- Communication system DTCs (DTCs that start with U) that are output correspond to "Air Conditioning Amplifier Communication Stop Mode" in "DTC Combination Table" (Refer to DIAGNOSIS SYSTEM [11/2015 - ]
)
|
- Air conditioning amplifier assembly branch line or connector
- Power source circuit of air conditioning amplifier assembly
- Air conditioning amplifier assembly ground circuit
- Air conditioning amplifier assembly
|