Caution / Notice / Hint

NOTE:

After turning the power switch off, waiting time may be required before disconnecting the cable from the negative (-) auxiliary battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) auxiliary battery terminal notices before proceeding with work.
Refer to PRECAUTION [06/2015 - ]
When disconnecting the cable from the negative (-) auxiliary battery terminal while performing repairs, some systems need to be initialized after the cable is reconnected.
Refer to INITIALIZATION [06/2015 - 11/2018] , or refer to INITIALIZATION [11/2018 - ]
After replacing the airbag sensor assembly, refer to initialization.
Refer to INITIALIZATION [06/2015 - 11/2018] , or refer to INITIALIZATION [11/2018 - ]

HINT:

To reproduce the DTC, wiggle each of the SRS airbag system connectors, or drive the vehicle on actual city roads or rough roads.