LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2018 >> Highlander XLE, FWD >> Repair and Diagnosis >> Body & Frame >> Exterior/Interior Trim >> Exterior Panels / Trim (Service Information) (Except Hybrid) >> Rear Wheel House Plate >> Removal [12/2013 - ] >> Procedure

Removal [12/2013 - ]: Procedure

  1. REMOVE REAR WHEEL HOUSE PAD 
    1. Remove the 2 screws.
      GTY424036Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the clip and rear wheel house pad.
scientia non olet · About LEMON Manuals