LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2018 >> Highlander XLE, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 14 (SFI System [2GR-FE] - Diagnostic Codes - (Except Hybrid) (3 Of 5)) >> SFI System >> DTC P0125: Insufficient Coolant Temperature for Closed Loop Fuel Control [12/2013 - 11/2016] >> Typical Malfunction Thresholds

Typical Malfunction Thresholds

WARNING: This page is about a different car, the 2016 Toyota Highlander, 2015 Toyota Highlander, and 2014 Toyota Highlander. However, it is still accessible from the selected car via links, so may be relevant.
Time until actual engine coolant temperature reaches closed loop fuel control enabling temperature 92 seconds: Engine coolant temperature at engine start is (closed-loop engine coolant temperature - 8.33°C ([46.994°F]) or higher
151 seconds: Engine coolant temperature at engine start is (closed-loop engine coolant temperature - 19.44°C [66.992°F]) or higher, and less than (closed-loop engine coolant temperature - 8.33°C [46.994°F])
1200 seconds: Engine coolant temperature at engine start is less than (closed-loop engine coolant temperature - 19.44°C [66.992°F])