LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2018 >> Highlander XLE, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 10 (Engine Intake System (2GR-FE) (Inspection) (Except Hybrid)) >> Intake System >> On-Vehicle Inspection [12/2013 - 11/2016] >> Procedure

On-Vehicle Inspection [12/2013 - 11/2016]: Procedure

WARNING: This page is about a different car, the 2016 Toyota Highlander, 2015 Toyota Highlander, and 2014 Toyota Highlander. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSPECT INTAKE SYSTEM 
    1. Check that there are no vacuum leaks at the points shown in the illustration.

      HINT: 

      Perform "Inspection After Repair" after repairing vacuum leaks in the intake system.

      Refer to INITIALIZATION [12/2013 - 11/2016]

      GTY443392Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. PERFORM INITIALIZATION 
    1. Perform "Inspection After Repair" after repairing vacuum leaks in the intake system.

      Refer to INITIALIZATION [12/2013 - 11/2016]

scientia non olet · About LEMON Manuals