LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2018 >> Highlander XLE, AWD >> Repair and Diagnosis >> Accessories & Equipment >> Headlights >> Lighting System (Exterior) - Service Information - (Except Hybrid) >> Rear Light Assembly >> Reassembly [11/2016 - ] >> Procedure

Reassembly [11/2016 - ]: Procedure

  1. INSTALL REAR LIGHT PROTECTOR 
    1. Install a new rear light protector.
      GTY721110Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSTALL REAR LIGHT GASKET 
    1. Install a new rear light gasket.
      GTY721111Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  3. INSTALL BACK-UP LIGHT SOCKET 
  4. INSTALL BACK-UP LIGHT BULB 
    1. Install the back-up light bulb to the back-up light socket.
    2. Turn the back-up light socket with the back-up light bulb as shown in the illustration to install them as a unit.
      GTY738534Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals