LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2018 >> Highlander XLE, AWD >> Repair and Diagnosis >> Accessories & Equipment >> Headlights >> Lighting System (Exterior) - Service Information - (Except Hybrid) >> Headlight Assembly >> Disassembly [11/2016 - ] >> Procedure

Disassembly [11/2016 - ]: Procedure

  1. REMOVE NO. 1 HEADLIGHT BULB 
    1. Turn the No. 1 headlight bulb as shown in the illustration to remove it.
      GTY696391Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      NOTE:

      Do not touch the bulb glass.

  2. REMOVE NO. 2 HEADLIGHT BULB 
    1. Turn the back cover assembly as shown in the illustration to remove it.
      GTY696407Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Disconnect the connector.
      GTY733073Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    3. Turn the No. 2 headlight bulb as shown in the illustration to remove it.
      GTY696400Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      NOTE:

      Do not touch the bulb glass.

  3. REMOVE FRONT TURN SIGNAL LIGHT BULB 
    1. Turn the headlight cord with the front turn signal light bulb as shown in the illustration to disconnect them as a unit.
      GTY696392Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the front turn signal light bulb from the headlight cord.
  4. REMOVE FRONT SIDE MARKER LIGHT BULB 
    1. Turn the headlight cord with the front side marker light bulb as shown in the illustration to disconnect them as a unit.
      GTY696393Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the front side marker light bulb from the headlight cord.
scientia non olet · About LEMON Manuals