DTC P0014: Camshaft Position "B" - Timing Over-Advanced or System Performance (Bank 1); DTC P0015: Camshaft Position "B" - Timing Over-Retarded (Bank 1) [12/2013 - 08/2014]: Description

WARNING: This page is about a different variant/trim than selected.

Refer to DTC P0013.

DTC No.	Detection Item	DTC Detection Condition	Trouble Area	MIL	Memory
P0014	Camshaft Position "B" - Timing Over-Advanced or System Performance (Bank 1)	Exhaust valve timing is stuck at a certain value when in the advance range (2 trip detection logic).	Valve timing Camshaft timing oil control valve assembly (for exhaust camshaft) Camshaft timing exhaust gear assembly Oil control valve filter ECM	Comes on	DTC stored
P0015	Camshaft Position "B" - Timing Over-Retarded (Bank 1)	Exhaust valve timing is stuck at a certain value when in the retard range (1 trip detection logic).	Valve timing Camshaft timing oil control valve assembly (for exhaust camshaft) Camshaft timing exhaust gear assembly Oil control valve filter ECM	Comes on	DTC stored