LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2018 >> Highlander LE Plus, FWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 40 (SFI System [1AR-FE] - Diagnostic Codes - (Except Hybrid) (3 Of 8)) >> SFI System >> DTC P2014: Intake Manifold Runner Position Sensor / Switch Circuit (Bank 1); DTC P2016: Intake Manifold Runner Position Sensor / Switch Circuit Low (Bank 1); DTC P2017: Intake Manifold Runner Position Sensor / Switch Circuit High (Bank 1) [12/2013 - 11/2016] >> Monitor Strategy

Monitor Strategy

WARNING: This page is about a different variant/trim than selected.
Related DTCs P2014: Tumble control valve position sensor range check (chattering)
P2016: Tumble control valve position sensor range check (low voltage)
P2017: Tumble control valve position sensor range check (high voltage)
Required Sensors/Components (Main) Intake air control valve actuator (for tumble control valve)
Required Sensors/Components (Related) -
Frequency of Operation Continuous
Duration 0.5 seconds
MIL Operation Immediate
Sequence Operation None
scientia non olet · About LEMON Manuals